Source-Connect Link and Source-Connect 3.9 Pro
This article is part of the Source-Connect Pro and Pro X 3.9 User GuideSource-Connect Link provides a direct, internal connection via AAX, Audio Units and VST plugins to and from the Source-Connect application directly to your supported DAW of choice , such as Pro Tools, Logic, Nuendo etc.
Source-Connect Link is a quick, easy way to use Source-Connect, Remote Transport Sync, and the Q Manager with your DAW when you don’t have the external equipment and/or an appropriate audio interface to use Source-Connect with its own audio device.
This enables you to use the full features and stability of the Standalone application while taking advantage of the flexibility and recording/mixing features of your DAW without needing additional cables or audio interfaces.
How to download Source-Connect Link
The plugin can be downloaded together with Source-Connect Pro/Pro X via the user dashboard Downloads page. It is not a separate download, it is included with the Source-Connect application.
Source-Connect Link with Pro supports the following sample rates:
- 44.1 kHz
- 48 kHz
- 88.2 kHz
- 96 kHz
- 176.4 kHz
- 192 kHz
Using higher sample rates
While the higher sample rates of 88.2 and 96khz are supported, Source-Connect will downsample these to 44.1 and 48khz respectively for transmission. For this reason, you cannot use RTS or the Q Manager with these sample rates.
Note: the Source-Connect Link plug-in is for two channels max. Source-Nexus I/O is required for more than two channels.
Table of Contents